Bosch SDS-plus 1/2in Dust Collection Attachment
This mobile dust extractor allows users of the Bosch 18V Bulldog™ to achieve maximum mobility around the jobsite with a dust-extraction solution, using only one battery. The Bosch GDE18V-12 SDS-plus® Dust Collection Attachment features a HEPA filter, allowing users of the 18V ¾ In. GBH18V-22 Bulldog™ rotary hammer to move toward compliance with OSHA silica dust regulations. The extractor mounts to terminals on the hammer, allowing use of the hammer battery, so no additional battery is required. This extractor has auto power-on, providing vacuum suction automatically when drilling. It also has auto power-off, with a built-in two-second delay after releasing the hammer trigger, to allow collection of remaining dust. The extractor has an aluminum guide rail for durability and smooth retraction of the Dust Eye during the drilling process. The Dust Eye accommodates bit diameters up to 1/2 In. diameter. The retractable guide rail accommodates bit lengths up to 6-1/2 In. in overall length. The GDE18V-12 18V SDS-plus® Dust Collection Attachment is the ideal pairing for the GBH18V-22 for fast jobsite cleanup.
Mobile dust extractor design – built to deliver maximum mobility used with the Bosch 18V GBH18V-22 Bulldog™ rotary hammer
HEPA filter – allows users to move toward OSHA silica dust regulation compliance
Tool battery compatible – mounts to the terminals of the tool, allowing use of hammer battery so no additional battery is required
1/2 In. Dust Eye – for use with bits up to 1/2 In. in diameter
Aluminum guide rail – provides smooth retraction of the Dust Eye during the drilling application
Removable dust container – provides capacity for up to 20 holes using a 1/2 In. diameter bit drilling 2 In. deep into concrete
Auto-power on – delivers power to the attachment when the user pulls the hammer trigger
Transparent container – permits monitoring of actual dust level
Dust control – reduces harmful airborne silica dust and reduces the labor required for dust clean up
LED light – centered on bit to illuminate the work area