WL Fuller 11/64in Drill Bit Hole Round Shank Taper Point Drill Bit Countersink
Used to countersink and counterbore for the heads of screws in woods, plastics, and non-ferrous materials. Made of Carbon Steel and heat-treated for long tool life. The Type “C” countersink is designed for use in all woods, plastics, and non- ferrous metals. The countersink is held in place with 2 hex socket set screws fastened into the flutes of the drill. This countersink can be mounted on taper point, brad point and regular point drills.
CM – Countersink mounted on round shank taper point drill with stop collar
The Countersinks can also be mounted on ordinary straight twist drills allowing the screw thread to cut its own hole or by using correct pilot drill size for root diameter of thread allowing shank of screw to force its way into the wood
The countersink is held in place with 2 hex socket set screws fastened into the flutes of the drill
Countersink Diameter: 3/8 In.
Made in U.S.A
Specifications
Related products
Drill Bits
Drill Bits
Drill Bits
Drill Bits
